Dyson Light/Slim Ball repair
Dyson Light/Slim Ball Cord or Plug
The owner inspection can confirm visible cord or plug damage, but replacement requires opening a mains-voltage termination and is a professional repair. This procedure is scoped to the Light/Slim Ball (UP16) and its corded Dyson upright platform.
Exact applicability
Machines covered by this guide
- Light/Slim Ball machine code UP16
- Light Ball Animal Exclusive
- Light Ball Origin Exclusive
- Slim Ball Animal
- Slim Ball Multi Floor
- UP16 Multi Floor Exclusive
Repair scope
Before you order a part
- Repair path
- Professional repair
- Difficulty
- Professional service
- Time
- 10–20 minutes to document for service
A replacement component may be available for Light/Slim Ball (UP16). Confirm the failed assembly and exact fit before ordering; parts availability does not make this professional repair safe for DIY work.
Instructions
Safe checks before professional service
- Bright flashlight
- Known-working wall outlet
- Turn the vacuum off, unplug it by holding the plug, and let it cool before removing the bin, hose, wand, cleaner head, or filter cover.
- Use only owner-access points and maintenance actions documented for the exact machine code.
- Do not plug in a machine with cut, flattened, cracked, melted, taped, or exposed cord insulation, a loose plug blade, or a damaged strain relief.
- Do not splice, tape, shorten, or install a plug-end repair on the vacuum cord.
- Do not open the motor, battery pack, charger, switch, wiring, control board, pump, sensor module, or another sealed electrical assembly. Internal diagnosis belongs with a qualified repair technician.
Confirm the Light/Slim Ball configuration
Light/Slim Ball (UP16) is a bagless corded upright with a electrically driven cleaner head, clear bin, upright body, and removable hose and wand. UP16 Light Ball and Slim Ball retail variants share a working U.S. support route under Slim Ball and use a powered cleaner-head connection rather than a user belt.. Cataloged variants include Light Ball Animal Exclusive, Light Ball Origin Exclusive, Slim Ball Animal, Slim Ball Multi Floor, UP16 Multi Floor Exclusive. Match the machine code and serial label before ordering a filter where fitted, cleaner head, bin, hose, wand, or external seal; a retail family name can cover incompatible hardware.
Inspect the complete unplugged cord
Starting at the plug, examine every accessible inch of cord, both sides of the plug, the strain relief, and the point where the cord enters the machine. Look and smell for cuts, crushed areas, discoloration, heat, arcing marks, or stiffness.
Record when power fails
Without energizing a visibly damaged cord, note whether the reported fault occurred as the cord moved, at full extension, near the plug, or near the machine entry. This observation helps a technician locate the failure; it is not permission to flex-test a live cord.
Book a complete cord-system repair
Keep the machine unplugged and arrange professional replacement with the exact cord, strain relief, terminals, and routing for this model. The repaired machine must receive insulation, grounding where applicable, strain-relief, and operating checks before return to use.
Document the inspection
Photograph any visible damage and record the exact symptom, indicator, error message, and Light/Slim Ball (UP16) identity while the machine remains safely disconnected. This prevents an unconfirmed part choice during service handoff.
Sources and review
Guide references
Official references used for machine identity, safety, and owner-access boundaries.
Repair options
Book model-specific professional service
Related repairs
Other possible repairs for your Light/Slim Ball
These are other repair paths applicable to this model.