ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Dyson model guide

Dyson Light/Slim Ball

UP16 Light Ball and Slim Ball retail variants use a powered cleaner-head connection rather than a conventional exposed belt system.UP16 Light Ball and Slim Ball retail variants use a powered cleaner-head connection.

Status
Discontinued
Type
Corded bagless lightweight ball upright vacuum
Characteristics
tall narrow cyclone tower · compact spherical steering body · long rear pull-up wand
Repair finder

Model issues and repair guidance

Service both washable filter positions before judging heat shutdown, then compare hose suction with the lightweight floorhead. A floor-only loss belongs to the lower hose, brush chamber or electrical head connection; the brush drive is not the conventional user stretch belt found on older clutched machines. Keep floor drive and whole-machine power as separate tests.Service both filters, then compare hose with floor pickup. Lower-only loss stays with lower hose, brush and electrical head; do not apply an older clutch-belt repair. Separate floor drive from whole-machine power.

Possible causes

Possible repair paths for your Light/Slim Ball

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repair
Cleaner Head RepairCleaner-head motors, wiring, drive assemblies, and housing faults that stop this Dyson's fitted powered head from cleaning correctly.View repairBin RepairCracked bins, worn latches, blocked inlets, and damaged bin seals that affect airflow or debris release on this Dyson.View repairSeal or GasketVacuums rely on sealed airflow.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repair
Power Switch RepairA worn physical power switch, button, actuator, terminal, or immediate connection that interrupts mains-powered startup.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repair
1–4 of 10

Dyson Light/Slim Ball

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Dyson Light/Slim Ball
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now