Dyson Light/Slim Ball repair
Dyson Light/Slim Ball Hose Repair
The removable flexible hose on this corded Dyson upright platform can be checked for a clog, split, damaged cuff, or poor seal without opening the vacuum body. This procedure is scoped to the Light/Slim Ball (UP16) and its corded Dyson upright platform.
Exact applicability
Machines covered by this guide
- Light/Slim Ball machine code UP16
- Light Ball Animal Exclusive
- Light Ball Origin Exclusive
- Slim Ball Animal
- Slim Ball Multi Floor
- UP16 Multi Floor Exclusive
Repair scope
Before you order a part
- Repair path
- Owner maintenance / DIY
- Difficulty
- Basic owner maintenance
- Time
- 20–40 minutes
Order only a genuine replacement listed for Light/Slim Ball (UP16) after the failed assembly is confirmed; family-name resemblance does not establish compatibility.
Instructions
How to complete this repair
- Bright flashlight
- Soft dry brush
- Clean cloth
- Protective gloves for sharp debris
- Turn the vacuum off, unplug it by holding the plug, and let it cool before removing the bin, hose, wand, cleaner head, or filter cover.
- Use only owner-access points and maintenance actions documented for the exact machine code.
- Do not use a knife, wire, drain snake, or heat to clear or reshape a hose.
- Do not tape over a split hose as a permanent repair; loose tape can enter the airway and hidden leaks reduce performance.
Confirm the Light/Slim Ball configuration
Light/Slim Ball (UP16) is a bagless corded upright with a electrically driven cleaner head, clear bin, upright body, and removable hose and wand. UP16 Light Ball and Slim Ball retail variants share a working U.S. support route under Slim Ball and use a powered cleaner-head connection rather than a user belt.. Cataloged variants include Light Ball Animal Exclusive, Light Ball Origin Exclusive, Slim Ball Animal, Slim Ball Multi Floor, UP16 Multi Floor Exclusive. Match the machine code and serial label before ordering a filter where fitted, cleaner head, bin, hose, wand, or external seal; a retail family name can cover incompatible hardware.
Detach the complete hose
Follow the exact owner guide to release both hose ends without twisting the cuffs beyond their stops. Inspect each latch, cuff, sealing face, and the connection on the machine and wand.
Check for a blockage from both ends
Keep the hose relaxed and look through it with a flashlight. Remove accessible debris from the nearest open end, taking care around sharp objects. Do not force a rigid object around a bend.
Inspect the relaxed and extended hose
Look for pinholes, splits between ribs, crushed sections, a separated internal liner, and loose or cracked cuffs. Flex the unplugged hose gently while watching suspect areas; do not perform a live suction leak test.
Refit or replace the exact hose assembly
Reconnect an undamaged hose until both ends latch. If it is split or its cuff is damaged, replace the complete model-specific hose and verify routing and wand operation before one short pickup test.
Sources and review
Guide references
Official references used for machine identity, safety, and owner-access boundaries.
Repair options
Repair it yourself or book professional service
Related repairs
Other possible repairs for your Light/Slim Ball
These are other repair paths applicable to this model.