Dyson 360 Vis Nav repair
Dyson 360 Vis Nav Robot Dock Repair
Dock repair on the 360 Vis Nav is limited to its exact base, power supply, cable, contacts, alignment surfaces, and documented dock accessory functions after robot-side faults are excluded. This procedure is scoped to the 360 Vis Nav (RB03) and its 360 Vis Nav robot platform.
Exact applicability
Machines covered by this guide
- 360 Vis Nav machine code RB03
Repair scope
Before you order a part
- Repair path
- Owner diagnosis, then repair as confirmed
- Difficulty
- Owner diagnosis only
- Time
- 20–40 minutes
Order only a genuine replacement listed for 360 Vis Nav (RB03) after the failed assembly is confirmed; family-name resemblance does not establish compatibility.
Instructions
How to diagnose this issue safely
- Bright flashlight
- Clean dry lint-free cloth
- Known-working wall outlet
- Switch the robot off and unplug its charging dock before removing the bin, filter, brush bar, or owner-removable battery cover.
- Use only owner-access points and maintenance actions documented for the exact machine code.
- Unplug the dock before cleaning contacts or inspecting its cable, adapter, tray, bag, or accessible path.
- Do not open a dock power supply, bridge charging contacts, or transfer another robot generation's dock.
Confirm the 360 Vis Nav configuration
360 Vis Nav (RB03) is an RB03 camera-guided dry robot with a full-width brush bar, edge actuator, wheels, and a charging dock. Match the machine code and serial label before ordering a filter, bin, brush bar, battery where owner-replaceable, or dock assembly; a retail family name can cover incompatible hardware.
Record the exact dock-side failure
Note whether the 360 Vis Nav reaches, aligns with, charges on, leaves, empties into, washes at, or otherwise communicates with the RB03 charging dock and robot charging contacts. Separate arrival at the base from the dock function that fails.
Verify dock identity, power, and placement
Match the dock and adapter to the exact model, confirm the outlet works, and inspect the external plug, cable, indicator, base, and placement clearances. Keep liquid away from every power and charging surface.
Inspect dry contacts and accessible dock hardware
With the dock unplugged, wipe robot and dock contacts with a dry cloth and inspect alignment guides, trays, bags, and documented removable evacuation or cleaning paths. Do not open the base.
Test one controlled dock cycle
Restore the fully assembled dock and run one short approach and charging or accessory test. If the robot reaches the base but the same dock function fails, arrange model-specific base, supply, contact, or dock-control service.
Sources and review
Guide references
Official references used for machine identity, safety, and owner-access boundaries.
Repair options
Repair it yourself or book professional service
Related repairs
Other possible repairs for your 360 Vis Nav
These are other repair paths applicable to this model.