Wessel-Werk model guide
Wessel-Werk RD 285
RD 285 uses a straight-suction floor nozzle from the RD platform configuration. Service review covers airflow channel, neck joint, rollers, and brush strips.RD 285 uses a straight-suction floor nozzle from the RD platform configuration.
- Status
- Active
- Type
- Wet-or-dry combination floor nozzle
- Characteristics
- 285 mm body · four support wheels · paired rubber sealing lips
Model issues and repair guidance
For wet pickup, paired rubber lips must contact the floor without sealing so tightly that the tool becomes hard to move. Compare bare-tube airflow, clear the short passive channel, and inspect both lips for nicks, curl, contamination, and equal seating. For dry use, check the selected insert arrangement before changing the vacuum. A head that rocks or leaves alternating wet bands directs service to the four support wheels, lip height, body flatness, and neck seal.Confirm tube airflow, clear the passive channel, and inspect paired rubber lips for nicks, curl, dirt, and equal seating. Match inserts to wet or dry work. Rocking or alternating wet bands point to four-wheel support, lip height, body flatness, and neck seal.
Possible causes
Possible repair paths for your RD 285
Start your vacuum repair
Just tell us what's wrong and schedule a time for us to come fix it.