Wessel-Werk model guide
Wessel-Werk RD 277
RD 277: straight-suction floor nozzle from the RD platform. Inspection covers airflow channel, neck joint, rollers, and brush strips.RD 277: straight-suction floor nozzle from the RD platform.
- Status
- Active
- Type
- Hybrid-base combination floor nozzle
- Characteristics
- 270 mm body · two rear wheels · double-swivel neck and foot switch
Model issues and repair guidance
When carpet and hard-floor results differ, verify that the foot control actually changes the hybrid base rather than increasing vacuum power. Confirm hose pull, clear the inlet and double-swivel passage, then watch the brush and sealing elements move through a complete pedal cycle. If one side stays raised, inspect the linkage, base plate, and wheel supports. A pickup change only at full steering angle points to neck restriction or seal leakage, not an electric brush fault.Confirm hose pull, clear inlet and swivel passage, then watch the hybrid base complete a full pedal cycle. One side staying raised points to linkage, plate, or wheels. Angle-only pickup loss points to neck blockage or seal leakage; the head has no electric drive.
Possible causes
Possible repair paths for your RD 277
Start your vacuum repair
Just tell us what's wrong and schedule a time for us to come fix it.