Wessel-Werk model guide
Wessel-Werk RD 266
RD 266: straight-suction floor nozzle from the RD platform. Inspection covers airflow channel, neck joint, rollers, and brush strips.RD 266: straight-suction floor nozzle from the RD platform.
- Status
- Active
- Type
- Low-noise combination floor nozzle
- Characteristics
- 260 mm body · two rear wheels · wide twin lint pickers and foot switch
Model issues and repair guidance
A sound change at the floor tool is not enough to assign a vacuum motor fault. Compare suction at the pipe, clear the low-noise nozzle path, and check that the pedal fully moves its internal floor-setting parts. With airflow intact, hair left in a band points to loaded or worn lint pickers rather than lost suction. A scrape or sudden push increase directs inspection to the base plate, two rear wheels, brush position, and double-swivel neck for binding.Compare pipe suction, clear the low-noise channel, and verify full pedal travel. Missed hair with steady airflow points to lint pickers. Scraping or heavy push moves to base plate, rear wheels, brush position, and swivel neck, not the vacuum motor.
Possible causes
Possible repair paths for your RD 266
Start your vacuum repair
Just tell us what's wrong and schedule a time for us to come fix it.