ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Wessel-Werk model guide

Wessel-Werk HEB 160

HEB 160: electric carpet powerhead. Service review covers brush roll, belt or turbine, bearings, and drive connection.HEB 160: electric carpet powerhead.

Status
Active
Type
Electric upholstery powerbrush
Characteristics
160 mm compact head · double-swivel neck · electrically driven brushroll
Repair finder

Model issues and repair guidance

This compact upholstery brush has an electric drive, so separate suction from brush power. Confirm airflow through the small inlet, then verify voltage at the attachment connection before opening the housing. With power removed, clear thread from the short roller and end supports and inspect the belt. If it stops only when the neck rotates, focus on contacts and joint wiring. If it stops under light load at every angle, continue through protector, switch path, and head motor.Separate airflow from brush power. Clear the small inlet, verify attachment voltage, then remove thread from roller ends and inspect the belt. Rotation-related cutout points to contacts or joint wiring; every-angle stopping adds protector, switch path, and head motor.

Possible causes

Possible repair paths for your HEB 160

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairBelt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repairPowerhead RepairPowerheads and floorheads do the heavy carpet work.View repair
Motor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairSeal or GasketVacuums rely on sealed airflow.View repair
1–4 of 7

Wessel-Werk HEB 160

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Wessel-Werk HEB 160
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now