Wessel-Werk model guide
Wessel-Werk CN 250
CN 250: straight-suction floor nozzle. Inspection covers airflow channel, neck joint, rollers, and brush strips.CN 250: straight-suction floor nozzle.
- Status
- Active
- Type
- Hard-floor crevice nozzle
- Characteristics
- 250 mm narrow body · rotating neck · front and rear brush strips
Model issues and repair guidance
This crevice-focused floor tool has no drive motor, so begin by comparing suction at the bare tube and at the rotating neck. If pull falls only with the tool fitted, clear the narrow internal channel and inspect the neck joint for leakage or binding. Debris left in grout lines with steady airflow directs attention to the front and rear strips or optional rubber blades, while poor wet pickup calls for the fitted blade arrangement and seal contact to be checked.Compare bare-tube suction with pull through the rotating neck. Tool-only loss points to its narrow channel or joint seal. With airflow steady, missed grout debris or liquid pickup moves to the fitted brush strips, rubber blades, and floor contact.
Possible causes
Possible repair paths for your CN 250
Start your vacuum repair
Just tell us what's wrong and schedule a time for us to come fix it.