ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

VAX model guide

VAX Pace Plus

Pace Plus uses a cordless stick configuration. Service review covers battery, charger, filter airflow, and powered brush.Pace Plus uses a cordless stick configuration.

Status
Active
Type
Cordless bagless stick/handheld vacuum
Characteristics
top-mounted 0.6-litre bin · removable rear battery · crevice and stair tools with wall mount
Repair finder

Model issues and repair guidance

Start with the collection chamber, filter stack, tube, and head neck. If direct suction remains, keep a stopped roller in the nozzle path before moving to cordless power tests. Remove the rear pack before opening the top-mounted bin, then inspect the bin outlet, tube, and floorhead neck. The wide stair tool is passive and should be tested at the body for a tool-only clog.Compare direct body suction with the tube and floorhead, then test nozzle drive and cordless power only after cooldown. Remove the rear pack, clear the top bin outlet and tube, then test the passive stair tool at the body before floorhead or battery work.

Possible causes

Possible repair paths for your Pace Plus

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairPowerhead RepairPowerheads and floorheads do the heavy carpet work.View repair
Battery ReplacementA worn battery can make a cordless or robot vacuum run for only a few minutes, shut off under load, or fail to charge.View repairCharger or AdapterCharger repair starts by identifying the exact direct external adapter, wall-mounted charging cradle, cable, and machine charging port.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repairSeal or GasketVacuums rely on sealed airflow.View repair
Power Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairControl Board RepairControl-board repair addresses a confirmed main PCB, motor controller, charging controller, display board, or sensor-control module.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repair
1–4 of 11

VAX Pace Plus

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for VAX Pace Plus
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now