ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Shark model guide

Shark Navigator NV350 Series

Navigator NV350 Series: bagless upright vacuum. Repair assessment covers brush drive, airflow, cord, and switch.Navigator NV350 Series: bagless upright vacuum.

Status
Discontinued
Type
Lift-away bagless upright family
Characteristics
detachable canister pod with top carry handle · tall side-release clear dust cup
Repair finder

Model issues and repair guidance

Use lift-away mode to isolate this family before ordering floor parts. Strong suction at the detached hose with poor carpet pickup directs service to the lower duct, bristle roller, end caps, belt, and powered-nozzle connection; weak hose suction directs service to the cup, foam and felt filters, exhaust filter, wand, and hose. If the motor stopped after airflow faded, correct the restriction and allow the protective thermostat to reset before testing the electrical system.Lift-away hose suction separates the branches. Strong hose suction points to lower duct, brushroll, end caps, belt, or nozzle connection; weak hose suction points to cup, filters, wand, and hose. Correct airflow before retesting a heat stop.

Possible causes

Possible repair paths for your Navigator NV350 Series

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBelt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repair
Hose RepairA hose problem can look like weak suction even when the motor is fine.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repairSeal or GasketVacuums rely on sealed airflow.View repair
Powerhead RepairPowerheads and floorheads do the heavy carpet work.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repairFan or BlowerThe fan or blower wheel creates airflow.View repair
1–4 of 12

Shark Navigator NV350 Series

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Shark Navigator NV350 Series
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now