ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

SEBO model guide

SEBO FELIX 2 Premium

Retired FELIX configuration with the wider 15-inch ET-2 electric powerhead, requiring different head and brush components from the current ET-1 model.Retired FELIX configuration with the wider 15-inch ET-2 electric powerhead.

Status
Discontinued
Type
Corded bagged wide-path modular upright vacuum
Characteristics
pivoting loop handle · detachable fabric-covered suction body · 15-inch swiveling powerhead
Repair finder

Model issues and repair guidance

Test suction at the removable hose and at the neck behind the detachable head, then inspect bag seating and filters. A red or flashing brush lamp calls for carpet-load, height, roller, belt, swivel-neck conductors and head-motor checks while body suction is kept separate. For no power or cutouts, test cord, plug and switch before the motor. Match the 15-inch head's roller, belt and swivel conductors before parts selection.Compare hose and neck suction; check bag and filters, then carpet load, height, roller, belt, swivel wiring and detachable head motor. For no power, test cord, plug and switch before motor work. Use the 15-inch swivel-head path.

Possible causes

Possible repair paths for your FELIX 2 Premium

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairBag System RepairA damaged bag dock, bag chamber, cover, latch, or seal that allows dust bypass, air leakage, or an incorrect bag fit.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repair
Belt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repairPowerhead RepairPowerheads and floorheads do the heavy carpet work.View repairSeal or GasketVacuums rely on sealed airflow.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repair
Power Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repairControl Board RepairControl-board repair addresses a confirmed main PCB, motor controller, charging controller, display board, or sensor-control module.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repair
1–4 of 12

SEBO FELIX 2 Premium

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for SEBO FELIX 2 Premium
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now