ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

SEBO model guide

SEBO AUTOMATIC X5

Retired 15-inch AUTOMATIC X platform with model-specific head cover, brush, belt, sensor, and electronic height-control components.Retired 15-inch AUTOMATIC X platform.

Status
Discontinued
Type
Corded bagged wide-path upright vacuum
Characteristics
white-gray or blue-yellow 15-inch head · electronic height sensor · rear hose-and-wand channel
Repair finder

Model issues and repair guidance

Use the bag and brush lamps before opening the body. Test the bag entrance, filters, rear hose and head airway; for a red or flashing brush light, inspect carpet load, roller wear, both drive belts, height sensor and servo path before the controller. For no power or cutouts, test cord, plug and switch before the motor. Confirm the 15-inch head revision before ordering roller, belt or height-sensor parts.Use bag and brush lamps; inspect bag path, filters, rear hose and airway, then roller, twin belts, height sensor and servo before controls. For no power, test cord, plug and switch before motor work. Confirm the 15-inch head revision.

Possible causes

Possible repair paths for your AUTOMATIC X5

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairBag System RepairA damaged bag dock, bag chamber, cover, latch, or seal that allows dust bypass, air leakage, or an incorrect bag fit.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repair
Belt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repairSeal or GasketVacuums rely on sealed airflow.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repair
Cord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repairControl Board RepairControl-board repair addresses a confirmed main PCB, motor controller, charging controller, display board, or sensor-control module.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repair
1–4 of 11

SEBO AUTOMATIC X5

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for SEBO AUTOMATIC X5
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now