ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

SEBO model guide

SEBO 350 MECHANICAL

Mechanically controlled 14-inch bagged upright whose wider cleaner head and head parts differ from the 300 MECHANICAL.Mechanically controlled 14-inch bagged upright whose wider cleaner head and head parts differ from the 300 MECHANICAL.

Status
Active
Type
Corded bagged wide-path commercial upright vacuum
Characteristics
14-inch cleaner head · manual height-adjustment dial · externally replaceable power cord
Repair finder

Model issues and repair guidance

Open the blockage access points and trace the bag entrance, filters, rear hose and head channel before the motor. If the brush stalls or sounds rough, inspect manual height setting, roller bristles and bearings, pulley and toothed belt rather than treating it as a control-board fault. For no power or cutouts, test cord, plug and switch before the motor. Its 14-inch cleaning path needs the wide roller, pulley and belt references.Trace bag, filters, hose and access channels; then inspect manual height, roller, bearings, pulley and toothed belt—not a control board. For no power, test cord, plug and switch before motor work. Use the 14-inch wide-head references.

Possible causes

Possible repair paths for your 350 MECHANICAL

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairBag System RepairA damaged bag dock, bag chamber, cover, latch, or seal that allows dust bypass, air leakage, or an incorrect bag fit.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repair
Belt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repairSeal or GasketVacuums rely on sealed airflow.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repair
Cord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repair
1–4 of 9

SEBO 350 MECHANICAL

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for SEBO 350 MECHANICAL
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now