ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Sanyo model guide

Sanyo Performax 12-Inch

Performax 12-Inch is an upright vacuum. Repair assessment covers brush drive, airflow, cord, and switch.Performax 12-Inch is an upright vacuum.

Status
Discontinued
Type
Corded bagged upright vacuum with onboard tools
Characteristics
12-inch metal-base nozzle · rear 8-foot hose and onboard tools · headlight above brushroll
Repair finder

Model issues and repair guidance

Begin weak pickup by comparing the rear hose with the narrow carpet base. Strong hose pull keeps the fault in the nozzle duct, belt, roller ends, or height setting; weak pull sends the check through the paper bag, under-bag filter, hose cuffs, and cover seal. If the headlight works but the brush is still, inspect the belt and shaft before the motor. A silent machine moves to plug, cord, handle switch, and thermal path.Compare rear-hose suction with floor pickup. Strong hose pull isolates nozzle duct, belt, roller ends, or height; weak pull points to bag, under-bag filter, cuffs, and cover seal. A dead unit follows plug, cord, switch, and thermal path.

Possible causes

Possible repair paths for your Performax 12-Inch

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repair
Belt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairSeal or GasketVacuums rely on sealed airflow.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repair
Power Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repairFan or BlowerThe fan or blower wheel creates airflow.View repair
1–4 of 11

Sanyo Performax 12-Inch

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Sanyo Performax 12-Inch
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now