ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Riccar model guide

Riccar R27P

R27P uses a bagged upright vacuum configuration. Service review covers brush drive, airflow, cord, and switch.R27P uses a bagged upright vacuum configuration.

Status
Discontinued
Type
Corded bagged upright vacuum
Characteristics
front bag door · rear telescopic wand and stretch hose · dirt-sensor lights above nozzle
Repair finder

Model issues and repair guidance

For a vacuum that runs but leaves grit, switch carpet mode on and confirm nozzle height before opening the front bag chamber. Then test bag, charcoal and media filters, stretch hose and wand for restriction. A worn brush strip differs from a protected lifetime belt and should be assessed separately. If the dirt lamps remain active after pickup returns, clean the sensor path rather than replacing airflow parts again.Turn carpet mode on and set height, then inspect bag, filters, stretch hose and wand. Separate worn brush strips from lifetime-belt protection. If dirt lamps persist after pickup is restored, service their optical path instead of repeating airflow parts.

Possible causes

Possible repair paths for your R27P

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairBelt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repair
Power Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repair
Motor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repairFan or BlowerThe fan or blower wheel creates airflow.View repairSeal or GasketVacuums rely on sealed airflow.View repair
1–4 of 11

Riccar R27P

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Riccar R27P
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now