ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Regina model guide

Regina Steemer / Power Scrubber

Steemer / Power Scrubber: carpet and floor washer. Repair assessment covers brush drive, solution path, pump, tanks, and seals.Steemer / Power Scrubber: carpet and floor washer.

Status
Discontinued
Type
Upright carpet-and-floor extraction washer
Characteristics
front solution-bottle dock · low scrub-nozzle housing · separate recovery tank
Repair finder

Model issues and repair guidance

Separate clean-solution delivery from dirty-water recovery before opening the base. No spray moves through the bottle seat, cap valve, trigger linkage, tubing, jets, and pump; liquid left on the floor moves through the recovery mouth, tank lid, gasket, float, hose, fan, and suction motor. Uneven scrubbing calls for clearing the low brush deck and checking both ends of its drive. Do not add a dry-vacuum bag, powerhead, cord reel, battery, or charger path to this washer.No spray follows bottle seat, cap valve, trigger, tubing, jets, and pump. Poor recovery follows mouth, tank lid, gasket, float, hose, fan, and suction motor. Uneven agitation moves to the low brush deck and drive. This washer has no dry bag or powerhead branch.

Possible causes

Possible repair paths for your Steemer / Power Scrubber

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairSeal or GasketVacuums rely on sealed airflow.View repairPump or Liquid SystemPump and liquid-system repair addresses the clean-water delivery path: tank outlet, cap, valve, tubing, pump, spray channel, and model-specific wet-head connections.View repairWet Roller RepairWet-roller repair addresses the absorbent roller, end caps, bearings, drive coupling, removable tray, and seating surfaces used to scrub and collect liquid.View repair
Bag or BinThe bag, bin, or dust cup is part of the airflow system.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repair
Fan or BlowerThe fan or blower wheel creates airflow.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repair
1–4 of 10

Regina Steemer / Power Scrubber

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Regina Steemer / Power Scrubber
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now