ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Regina model guide

Regina Housekeeper II

Housekeeper II is an upright vacuum. Repair assessment covers brush drive, airflow, cord, and switch.Housekeeper II is an upright vacuum.

Status
Discontinued
Type
Bagged bypass-motor upright vacuum
Characteristics
top-fill front bag door · rear hose-and-wand assembly · small nozzle clean-out door
Repair finder

Model issues and repair guidance

Open the nozzle cleanout before removing the carpet base. If rear-wand suction remains strong, inspect cleanout, lower passage, belt, roller supports, bristles, and bottom plate; if wand suction is weak, inspect the top-fill bag, chamber filter, hose, bag-door seal, and inlet joint. A working headlight narrows a stopped brush toward its mechanical drive. With the roller free, no start is traced through supply lead, foot switch, protector, fan, and motor.Open the nozzle cleanout, then compare wand suction. Strong pull isolates lower passage, belt, roller supports, bristles, and plate; weak pull points to top-fill bag, filter, hose, and door seal. A lit headlight narrows brush trouble. No start follows cord and foot switch.

Possible causes

Possible repair paths for your Housekeeper II

Bag or BinThe bag, bin, or dust cup is part of the airflow system.View repairClog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repair
Belt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairSeal or GasketVacuums rely on sealed airflow.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repair
Power Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairFan or BlowerThe fan or blower wheel creates airflow.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repair
1–4 of 11

Regina Housekeeper II

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Regina Housekeeper II
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now