ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Regina model guide

Regina Brush 'n' Beat

Brush 'n' Beat: upright vacuum. Inspection covers brush drive, airflow, cord, and switch.Brush 'n' Beat: upright vacuum.

Status
Discontinued
Type
Lightweight bagged direct-air upright vacuum
Characteristics
hollow dirt-duct handle · oversize soft outer bag · slim flat-hanging profile
Repair finder

Model issues and repair guidance

Follow debris from the slim nozzle through the hollow handle into the soft bag. A full liner, blocked handle elbow, loose bag coupling, or leaking collar can cut airflow before the direct-air fan is blamed; carpet-only loss adds belt tension, roller ends, bristle height, and plate fit. A rattle remaining with the belt removed belongs to fan or motor. With no hose fitted, a silent machine moves through plug, cord hooks, handle switch, terminals, and motor.Trace nozzle, hollow handle, liner, outer bag, coupling, and collar before the fan. Carpet-only loss adds belt, roller ends, bristles, and plate fit. Brush-free rattle points to fan or motor. With no hose branch, no start follows plug, cord, handle switch, and terminals.

Possible causes

Possible repair paths for your Brush 'n' Beat

Bag or BinThe bag, bin, or dust cup is part of the airflow system.View repairClog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairBelt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repair
Fan or BlowerThe fan or blower wheel creates airflow.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairSeal or GasketVacuums rely on sealed airflow.View repair
Cord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repair
1–4 of 10

Regina Brush 'n' Beat

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Regina Brush 'n' Beat
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now