ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

ProTeam model guide

ProTeam ProGuard 16 MD

ProGuard 16 MD: commercial wet/dry vacuum. Inspection covers tank seals, hose, float protection, controls, and motor.ProGuard 16 MD: commercial wet/dry vacuum.

Status
Active
Type
16-gallon mobile-detailing wet-dry vacuum
Characteristics
tall round tank · rear push handle · large rear wheels with front casters
Repair finder

Model issues and repair guidance

For the mobile-detailing tank, first distinguish a filled drum from a blocked long hose. Drain the vessel, check that the ball float drops from the cage, fit the correct wet or dry filter, then inspect the hose cuffs, inlet, lid gasket, drain cap, and cart-mounted connections. If pickup remains low at the bare inlet, continue at the collector, exhaust duct, fan, and motor. No power after those checks follows the long cord and lid switch.Drain the large tank, free the ball float, match wet or dry filter, and inspect long hose, cuffs, inlet, lid gasket, drain, and cart joints. Weak bare-inlet pull moves to collector, duct, fan, and motor; no power follows cord and lid switch.

Possible causes

Possible repair paths for your ProGuard 16 MD

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repair
Seal or GasketVacuums rely on sealed airflow.View repairFan or BlowerThe fan or blower wheel creates airflow.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repair
Motor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repair
1–4 of 9

ProTeam ProGuard 16 MD

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for ProTeam ProGuard 16 MD
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now