ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

ProTeam model guide

ProTeam ProGuard 15 / 20

ProGuard 15 / 20: commercial wet/dry vacuum. Repair assessment covers tank seals, hose, float protection, controls, and motor.ProGuard 15 / 20: commercial wet/dry vacuum.

Status
Active
Type
15-to-20-gallon cart wet-dry vacuum family
Characteristics
large tip-and-pour tank · rear push handle · optional front-mounted squeegee
Repair finder

Model issues and repair guidance

Treat the tank size and optional front squeegee as configuration branches, not as different motor faults. If the squeegee leaves liquid, inspect blade contact, its pickup channel, hose, and tank inlet; if all pickup stops near capacity, drain through the hose or pour spout and verify the float releases. Match wet or dry media, then inspect lid and inlet gaskets. Open-path weakness moves to the collector, fan, motor, cord, and switch.Squeegee-only loss points to blade contact, pickup channel, hose, and inlet; full-tank loss points to drain and float release. Match wet or dry media and inspect gaskets. Continued bare-inlet weakness moves to collector, fan, motor, cord, and switch.

Possible causes

Possible repair paths for your ProGuard 15 / 20

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repair
Seal or GasketVacuums rely on sealed airflow.View repairFan or BlowerThe fan or blower wheel creates airflow.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repair
Motor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repair
1–4 of 9

ProTeam ProGuard 15 / 20

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for ProTeam ProGuard 15 / 20
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now