ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

ProTeam model guide

ProTeam ProGuard 10

ProGuard 10: commercial wet/dry vacuum. Service review covers tank seals, hose, float protection, controls, and motor.ProGuard 10: commercial wet/dry vacuum.

Status
Active
Type
Ten-gallon wheeled wet-dry vacuum
Characteristics
round ten-gallon tank · four-caster base · top motor lid and hose inlet
Repair finder

Model issues and repair guidance

When the wheeled tank loses pickup, identify whether the ball float closed because liquid reached the cage or whether a hose, inlet, or filter restriction remains after draining. Check the wet filter for liquid work and the cartridge or bag for dry debris, then inspect the lid gasket, inlet gasket, drain cap, and hose cuffs. With the tank empty and path open, electrical diagnosis continues through the long cord, switch, cooling duct, fan, and motor.Separate full-tank float closure from a hose, inlet, or filter restriction. Match wet filter or dry collection media, then inspect lid gasket, inlet gasket, drain cap, and cuffs. An empty open tank that stays dead moves to cord, switch, fan, and motor.

Possible causes

Possible repair paths for your ProGuard 10

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repair
Seal or GasketVacuums rely on sealed airflow.View repairFan or BlowerThe fan or blower wheel creates airflow.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repair
Motor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repair
1–4 of 9

ProTeam ProGuard 10

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for ProTeam ProGuard 10
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now