ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Maytag model guide

Maytag M500

M500 is a bagged upright vacuum. Repair assessment covers brush drive, airflow, cord, and switch.M500 is a bagged upright vacuum.

Status
Discontinued
Type
Lightweight bagged direct-air upright vacuum
Characteristics
smooth hard bag compartment · automatic-height nozzle · front headlight lens
Repair finder

Model issues and repair guidance

This lightweight direct-air upright has automatic height, a self-sealing bag, brushroll, belt, squeegee, and circuit breaker. Follow the direct-air route through the nozzle throat, fan inlet, fill tube, and self-sealing bag instead of looking for an attachment hose. With power disconnected, clear the passage and turn the brush by hand. A tripped breaker, stopped roller, or hot-rubber odor then separates nozzle load from cord, switch, fan, or motor service.Check the direct-air bag path before the automatic-height nozzle, belt, brushroll, squeegee, and circuit reset. Clear the direct-air path without adding hose service. Then separate belt or brush drag and a tripped breaker from cord, switch, fan, or motor work.

Possible causes

Possible repair paths for your M500

Bag or BinThe bag, bin, or dust cup is part of the airflow system.View repairClog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairBelt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repair
Seal or GasketVacuums rely on sealed airflow.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repair
Fan or BlowerThe fan or blower wheel creates airflow.View repair
1–4 of 9

Maytag M500

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Maytag M500
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now