ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Kirby model guide

Kirby Sentria II

Sentria II: belt-driven Kirby upright from the 2012–2014 generation. Inspection covers belt lifter, brush roll, bag path, cord, and drive system.Sentria II: belt-driven Kirby upright from the 2012–2014 generation.

Status
Discontinued
Type
Corded bagged power-assisted convertible upright vacuum
Characteristics
green-patterned outer bag · polymer base pan · handgrip-shaped lower bag collector
Repair finder

Model issues and repair guidance

Begin with belt lifter, nozzle belt, brush setting, height and indicator. For weak pickup, inspect bag, fill tube, fan, nozzle, hose and seals before the motor. Clicking, drag or slipping in assist mode calls for N/D pedal, slide and linkage checks. Tech Drive is its own path, not powerhead or reel work. Inspect polymer base-pan seating around drive and fan access during reassembly.Check belt lifter, belt, brush setting and nozzle height, then bag, fill tube, fan, throat, hose and seals. Treat clicking, drag or slipping as N/D pedal, slide and Tech Drive work—not powerhead or reel repair. Keep polymer base-pan fit separate from fan and drive access.

Possible causes

Possible repair paths for your Sentria II

Belt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repairClog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repair
Fan or BlowerThe fan or blower wheel creates airflow.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repair
Motor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repairSeal or GasketVacuums rely on sealed airflow.View repair
1–4 of 10

Kirby Sentria II

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Kirby Sentria II
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now