ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Kirby model guide

Kirby Model 517

Model 517: belt-driven Kirby upright from the earlier numbered-model era. Service review covers belt lifter, brush roll, bag path, cord, and drive system.Model 517: belt-driven Kirby upright from the earlier numbered-model era.

Status
Discontinued
Type
Corded cloth-bag metal upright vacuum
Characteristics
round top-mounted headlight · polished low motor body · crest-printed external cloth bag
Repair finder

Model issues and repair guidance

On this documented shared shell, verify belt engagement, brush projection and nozzle height before inspecting the crest-print cloth bag, fill tube, fan, nozzle throat and optional hose. A loaded cloth bag or damaged fan can reduce pickup without an electric head fault. For no power, test plug, cord, switch, carbon brushes and motor wiring; there is no Tech Drive or reel. Check brush projection at both ends before deciding the belt has slipped.On the shared shell, check belt, brush and height, then crest cloth-bag airflow, fill tube, fan, throat and hose. Trace plug, cord, switch, carbon brushes and motor—no Tech Drive or reel. Measure brush projection at both ends.

Possible causes

Possible repair paths for your Model 517

Belt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repairClog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repair
Fan or BlowerThe fan or blower wheel creates airflow.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repair
Motor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repairSeal or GasketVacuums rely on sealed airflow.View repair
1–4 of 10

Kirby Model 517

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Kirby Model 517
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now