ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Kirby model guide

Kirby Model 513

Model 513: belt-driven Kirby upright from the earlier numbered-model era. Service review covers belt lifter, brush roll, bag path, cord, and drive system.Model 513: belt-driven Kirby upright from the earlier numbered-model era.

Status
Discontinued
Type
Corded cloth-bag metal upright vacuum
Characteristics
round top-mounted headlight · polished low motor body · straight two-piece handle
Repair finder

Model issues and repair guidance

On this documented shared chassis, inspect belt engagement, brush wear and nozzle height, then the external cloth bag, fill tube, fan, airway and optional hose. The straight handle does not change the direct-air service path. For no power or arcing, trace plug, cord, switch, carbon brushes and motor wiring; no disposable filter, Tech Drive, reel or head motor applies. Separate optional-hose restriction from the direct nozzle throat before motor service.On the shared chassis, check belt, brush and height, then cloth bag, fill tube, fan, airway and hose. Trace plug, cord, switch, carbon brushes and motor—no filter, Tech Drive or reel. Separate hose and direct-nozzle airflow.

Possible causes

Possible repair paths for your Model 513

Belt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repairClog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repair
Fan or BlowerThe fan or blower wheel creates airflow.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repair
Motor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repairSeal or GasketVacuums rely on sealed airflow.View repair
1–4 of 10

Kirby Model 513

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Kirby Model 513
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now