ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Kirby model guide

Kirby Dual Sanitronic 80

Dual Sanitronic 80 uses a belt-driven Kirby upright from the 1967–1970 generation configuration. Service review covers belt lifter, brush roll, bag path, cord, and drive system.Dual Sanitronic 80 uses a belt-driven Kirby upright from the 1967–1970 generation configuration.

Status
Discontinued
Type
Corded bagged dual-speed metal upright vacuum
Characteristics
olive-green-and-chrome body · swiveling upper cord hook · visible suction-relief vent
Repair finder

Model issues and repair guidance

Separate upright and hose-mode airflow while checking the visible suction-relief vent, external bag, fill tube, fan and seals. For poor carpet work, verify belt engagement, brush wear and nozzle height. A speed-change or no-power complaint calls for plug, cord, dual-speed switch and motor-circuit checks; this chassis predates Tech Drive and has no reel or head motor.Compare upright and hose airflow; check relief vent, bag, fill tube, fan, belt, brush and height. Trace plug, cord, dual-speed switch and motor—this chassis has no Tech Drive or reel.

Possible causes

Possible repair paths for your Dual Sanitronic 80

Belt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repairClog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repair
Fan or BlowerThe fan or blower wheel creates airflow.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repair
Motor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repairSeal or GasketVacuums rely on sealed airflow.View repair
1–4 of 10

Kirby Dual Sanitronic 80

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Kirby Dual Sanitronic 80
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now