ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

iRobot/Roomba model guide

iRobot/Roomba Roomba s9 / s9+

Roomba s9 / s9+: robot vacuum with a collection or charging dock. Repair assessment covers brush module, wheels/sensors, battery, and dock.Roomba s9 / s9+: robot vacuum with a collection or charging dock.

Status
Discontinued
Type
D-shaped robot vacuum
Characteristics
flat-front D-shaped shell · extra-wide paired green rubber rollers
Repair finder

Model issues and repair guidance

The flat-front chassis uses extra-wide rollers, a rear caster and top bin. Clear both roller caps and the vacuum path, keep the filter dry, and clean bin-full sensors before replacing the head. Navigation differs from round models: inspect the squared-edge corner brush, camera, cliffs, rear caster and side wheels. For Error 36 or failed emptying, separate onboard sensors and battery from contacts, IR windows, dock bag, blower cover and tube.Service extra-wide rollers, caps, airway, dry filter, top bin and full-bin sensors. For route trouble, inspect the squared-edge brush, camera, cliffs, rear caster and side wheels. Split Error 36 or failed emptying among sensors, battery, contacts, IR windows, bag and tube.

Possible causes

Possible repair paths for your Roomba s9 / s9+

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repair
Robot Drive RepairRobot vacuums rely on wheels or tracks, axles, drive modules, sensors, and controls working together.View repairRobot Sensor RepairRobot sensor repair addresses a confirmed navigation camera, cliff sensor, bumper sensor, LiDAR unit, bin sensor, or related connector.View repairRobot Dock RepairRobot dock repair addresses the charging base, external power supply, cable, charging contacts, alignment hardware, and model-specific automatic emptying or wash functions.View repairCharger or AdapterCharger repair starts by identifying the exact direct external adapter, wall-mounted charging cradle, cable, and machine charging port.View repair
Battery ReplacementA worn battery can make a cordless or robot vacuum run for only a few minutes, shut off under load, or fail to charge.View repairSeal or GasketVacuums rely on sealed airflow.View repair
1–4 of 10

iRobot/Roomba Roomba s9 / s9+

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for iRobot/Roomba Roomba s9 / s9+
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now