ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

iRobot/Roomba model guide

iRobot/Roomba Roomba i7 / i7+

Roomba i7 / i7+: robot vacuum with a collection or charging dock. Repair assessment covers brush module, wheels/sensors, battery, and dock.Roomba i7 / i7+: robot vacuum with a collection or charging dock.

Status
Discontinued
Type
Camera-mapping robot vacuum
Characteristics
top navigation camera behind button ring · rear washable bin with evacuation port
Repair finder

Model issues and repair guidance

For Error 36 or weak pickup, remove both rollers, clear cap and bearing areas and the vacuum path, then clean filter, bin sensors and evacuation ports. A clean top camera, cliffs, caster and equal wheel travel precede map or drive work. Base service depends on the fitted bin: a standard bin only charges, while the plus bin adds evacuation. If emptying fails while charge works, isolate contact communication, IR windows, bag, lid and tube.For Error 36, clear rollers, caps, airway, filter, sensors and evacuation ports. Clean the top camera, cliffs, caster and wheels before map work. Confirm the bin supports emptying; if charge works but evacuation does not, inspect communication, IR windows, bag, lid and tube.

Possible causes

Possible repair paths for your Roomba i7 / i7+

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repair
Robot Drive RepairRobot vacuums rely on wheels or tracks, axles, drive modules, sensors, and controls working together.View repairRobot Sensor RepairRobot sensor repair addresses a confirmed navigation camera, cliff sensor, bumper sensor, LiDAR unit, bin sensor, or related connector.View repairRobot Dock RepairRobot dock repair addresses the charging base, external power supply, cable, charging contacts, alignment hardware, and model-specific automatic emptying or wash functions.View repairCharger or AdapterCharger repair starts by identifying the exact direct external adapter, wall-mounted charging cradle, cable, and machine charging port.View repair
Battery ReplacementA worn battery can make a cordless or robot vacuum run for only a few minutes, shut off under load, or fail to charge.View repairSeal or GasketVacuums rely on sealed airflow.View repair
1–4 of 10

iRobot/Roomba Roomba i7 / i7+

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for iRobot/Roomba Roomba i7 / i7+
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now