ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

iRobot/Roomba model guide

iRobot/Roomba Roomba i2

Roomba i2: robot vacuum. Service review covers brush module, wheels/sensors, battery, and dock.Roomba i2: robot vacuum.

Status
Discontinued
Type
Floor-tracking robot vacuum
Characteristics
camera-free dark round top with three-button arc · two green rubber floor rollers
Repair finder

Model issues and repair guidance

This build uses floor tracking without a top camera and returns to a low charger, not an evacuation tower. For missed strips or circling, clean floor-tracking and cliff sensors, inspect bumper and caster, then compare both drive wheels. For weak pickup, remove two rubber rollers, clear caps and bearings, and check head airway, bin, filter and ports. No charge or short runtime stays with battery seating, robot contacts, base power and alignment.Clean floor-tracking and cliff sensors, bumper, caster and both wheels; no top camera is fitted. For pickup, clear dual rollers, caps, bearings, head airway, bin, filter and ports. Test battery, contacts, base power and alignment—there is no evacuation or wet dock.

Possible causes

Possible repair paths for your Roomba i2

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repair
Robot Drive RepairRobot vacuums rely on wheels or tracks, axles, drive modules, sensors, and controls working together.View repairRobot Sensor RepairRobot sensor repair addresses a confirmed navigation camera, cliff sensor, bumper sensor, LiDAR unit, bin sensor, or related connector.View repairRobot Dock RepairRobot dock repair addresses the charging base, external power supply, cable, charging contacts, alignment hardware, and model-specific automatic emptying or wash functions.View repairCharger or AdapterCharger repair starts by identifying the exact direct external adapter, wall-mounted charging cradle, cable, and machine charging port.View repair
Battery ReplacementA worn battery can make a cordless or robot vacuum run for only a few minutes, shut off under load, or fail to charge.View repairSeal or GasketVacuums rely on sealed airflow.View repair
1–4 of 10

iRobot/Roomba Roomba i2

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for iRobot/Roomba Roomba i2
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now