ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

iRobot/Roomba model guide

iRobot/Roomba Roomba Combo j5 / j5+

Roomba Combo j5 / j5+: vacuum-and-mop robot with a collection or charging dock. Repair assessment covers brush module, liquid path, wheels/sensors, battery, and dock.Roomba Combo j5 / j5+: vacuum-and-mop robot with a collection or charging dock.

Status
Active
Type
Convertible vacuum-and-mop robot
Characteristics
swap-in rear tank-and-bin with flat mop pad · forward-facing obstacle camera in the bumper
Repair finder

Model issues and repair guidance

Start by identifying which rear bin is installed. With the dry evacuation bin, clear dual rollers, caps, vacuum path, filter and port sensors before dock work. With the tank-and-pad bin, verify insertion, clean detection windows, open wicks and an evenly damp pad; it has no lifting mop actuator. For navigation, clean the bumper camera and cliffs and compare wheels. Charging and emptying then divide among contacts, dock communication, bag and tube.Identify the rear bin first. Dry mode uses dual rollers, filter, sensors and an evacuation opening; wet mode adds tank, wicks and a fixed pad, not a lift arm. Clean bumper camera, cliffs and wheels, then check contacts, dock communication, bag and tube.

Possible causes

Possible repair paths for your Roomba Combo j5 / j5+

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repair
Wet Roller RepairWet-roller repair addresses the absorbent roller, end caps, bearings, drive coupling, removable tray, and seating surfaces used to scrub and collect liquid.View repairPump or Liquid SystemPump and liquid-system repair addresses the clean-water delivery path: tank outlet, cap, valve, tubing, pump, spray channel, and model-specific wet-head connections.View repairRobot Drive RepairRobot vacuums rely on wheels or tracks, axles, drive modules, sensors, and controls working together.View repairRobot Sensor RepairRobot sensor repair addresses a confirmed navigation camera, cliff sensor, bumper sensor, LiDAR unit, bin sensor, or related connector.View repair
Robot Dock RepairRobot dock repair addresses the charging base, external power supply, cable, charging contacts, alignment hardware, and model-specific automatic emptying or wash functions.View repairCharger or AdapterCharger repair starts by identifying the exact direct external adapter, wall-mounted charging cradle, cable, and machine charging port.View repairBattery ReplacementA worn battery can make a cordless or robot vacuum run for only a few minutes, shut off under load, or fail to charge.View repairSeal or GasketVacuums rely on sealed airflow.View repair
1–4 of 12

iRobot/Roomba Roomba Combo j5 / j5+

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for iRobot/Roomba Roomba Combo j5 / j5+
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now