ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

iRobot/Roomba model guide

iRobot/Roomba Roomba 800 Series

Roomba 800 Series: robot vacuum covering a shared robot platform. Repair assessment covers brush module, wheels/sensors, battery, and dock.Roomba 800 Series: robot vacuum covering a shared robot platform.

Status
Discontinued
Type
Random-navigation robot vacuum
Characteristics
camera-free 13.9-inch round shell · paired gray rubber extractors
Repair finder

Model issues and repair guidance

This round platform uses gray extractors but no top camera. For weak pickup, open the yellow frame, remove obstructions, clean caps and axles, clear the vacuum path, and wipe the AeroForce filter and bin ports. Random-navigation or Error 10 work belongs to cliffs, bumper, caster, side-wheel spring travel and equal resistance. Charge testing separates battery from robot contacts and Home Base power. There is no bagged evacuation or liquid path.Open the frame; clear extractors, caps, axles, airway, filter and bin ports. With no top camera, route or Error 10 checks use cliffs, bumper, caster and equal wheel travel. Split no charge among battery, contacts and Home Base; no evacuation or wet system is fitted.

Possible causes

Possible repair paths for your Roomba 800 Series

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repair
Robot Drive RepairRobot vacuums rely on wheels or tracks, axles, drive modules, sensors, and controls working together.View repairRobot Sensor RepairRobot sensor repair addresses a confirmed navigation camera, cliff sensor, bumper sensor, LiDAR unit, bin sensor, or related connector.View repairRobot Dock RepairRobot dock repair addresses the charging base, external power supply, cable, charging contacts, alignment hardware, and model-specific automatic emptying or wash functions.View repairCharger or AdapterCharger repair starts by identifying the exact direct external adapter, wall-mounted charging cradle, cable, and machine charging port.View repair
Battery ReplacementA worn battery can make a cordless or robot vacuum run for only a few minutes, shut off under load, or fail to charge.View repairSeal or GasketVacuums rely on sealed airflow.View repair
1–4 of 10

iRobot/Roomba Roomba 800 Series

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for iRobot/Roomba Roomba 800 Series
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now