ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Hoover model guide

Hoover High Performance Max

High Performance Max uses an upright vacuum configuration. Service review covers brush drive, airflow, cord, and switch.High Performance Max uses an upright vacuum configuration.

Status
Active
Type
Corded bagless upright vacuum
Characteristics
30-foot hook-wrapped cord · brush shutoff and height controls · telescoping wand
Repair finder

Model issues and repair guidance

Confirm brush shutoff and carpet height before opening the wide nozzle. Clear the cup outlet, filter stack, telescoping wand, hose, and lower channel, then turn the roller to distinguish packed end caps or a belt problem from lost suction. Because the lead stores on hooks rather than a reel, failed retraction is not an applicable repair. Power that changes as the 30-foot cord flexes calls for plug and cord testing after airflow passes.Verify brush shutoff and height, then clear cup outlet, filters, wand, hose, and lower channel. Inspect roller ends and belt for floor-only loss. The hook-wrapped lead has no reel; flex-related cutouts stay with cord.

Possible causes

Possible repair paths for your High Performance Max

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairBelt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repair
Hose RepairA hose problem can look like weak suction even when the motor is fine.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repairSeal or GasketVacuums rely on sealed airflow.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repair
Power Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repairFan or BlowerThe fan or blower wheel creates airflow.View repair
1–4 of 11

Hoover High Performance Max

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Hoover High Performance Max
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now