ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Hoover model guide

Hoover Complete Performance Advanced

Complete Performance Advanced: upright vacuum. Service review covers brush drive, airflow, cord, and switch.Complete Performance Advanced: upright vacuum.

Status
Active
Type
Corded bagged upright vacuum
Characteristics
front-opening bag door · four-position height dial · onboard hose and extension wand
Repair finder

Model issues and repair guidance

Verify that the bag collar is seated behind the front door and that inlet and exhaust filters are open before tracing weak suction. Compare hose pickup with the lower nozzle, clear the common duct, then check the four-position height setting, brush freedom, and stretch belt for floor-only loss. A door that will not close is a bag-fit problem; no-start or cutout diagnosis proceeds from plug and cord to switch, fan, and motor after airflow passes.Seat the bag collar and check both filters, then compare hose with floor pickup. Clear the common duct and inspect height setting, brush, and belt; trace plug, cord, switch, fan, and motor only after airflow.

Possible causes

Possible repair paths for your Complete Performance Advanced

Bag or BinThe bag, bin, or dust cup is part of the airflow system.View repairClog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBelt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repair
Brush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repairSeal or GasketVacuums rely on sealed airflow.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repair
Power Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repairFan or BlowerThe fan or blower wheel creates airflow.View repair
1–4 of 11

Hoover Complete Performance Advanced

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Hoover Complete Performance Advanced
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now