ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

H-P Products model guide

H-P Products Model 760

Model 760 is a central-vacuum power unit using true-cyclonic separation. Repair assessment covers motor/fan, filtration, controls, and low-voltage start.Model 760 is a central-vacuum power unit using true-cyclonic separation.

Status
Active
Type
Dual-motor true-cyclonic central power unit
Characteristics
six-gallon debris pail · stacked cylindrical motor housing · no bag or filter chamber
Repair finder

Model issues and repair guidance

Do not add a bag or filter cartridge to this dual-motor true-cyclonic unit. House-wide loss starts with the six-gallon debris pail, rim gasket, motor-guard screen and outdoor exhaust, followed by a comparison at the utility inlet. Because the two-motor housing draws from a 120-volt high-amperage branch, verify the specified circuit and reset before control-board or motor diagnosis; one weak inlet stays in its pipe run.This dual-motor cyclonic path has no bag or cartridge. Check pail gasket, guard screen, outdoor exhaust and utility-inlet suction. Verify the specified 120-volt circuit and reset before internal service; one weak inlet remains a branch issue.

Possible causes

Possible repair paths for your Model 760

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairControl Board RepairControl-board repair addresses a confirmed main PCB, motor controller, charging controller, display board, or sensor-control module.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repair
Bag or BinThe bag, bin, or dust cup is part of the airflow system.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repairFan or BlowerThe fan or blower wheel creates airflow.View repairSeal or GasketVacuums rely on sealed airflow.View repair
1–4 of 8

H-P Products Model 760

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for H-P Products Model 760
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now