ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

H-P Products model guide

H-P Products MaxAir

MaxAir: central-vacuum power unit using true-cyclonic separation. Inspection covers motor/fan, filtration, controls, and low-voltage start.MaxAir: central-vacuum power unit using true-cyclonic separation.

Status
Active
Type
Dual-motor true-cyclonic central power unit
Characteristics
six-gallon debris pail · tall twin-motor upper housing · outdoor exhaust connection
Repair finder

Model issues and repair guidance

This true-cyclonic path has no bag or cartridge to replace. For reduced pull everywhere, empty and reseat the six-gallon pail, clean the documented motor-guard screen and verify the outdoor exhaust is open before judging either motor section. Compare local utility suction with room valves to isolate piping. Its 240-volt supply, reset and low-voltage start circuit require separate no-run tests.No bag or cartridge applies. Empty and seal the pail, clean the motor-guard screen and inspect outdoor exhaust before motor work. Compare local and room suction, then separate 240-volt supply and reset from low-voltage start controls.

Possible causes

Possible repair paths for your MaxAir

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairControl Board RepairControl-board repair addresses a confirmed main PCB, motor controller, charging controller, display board, or sensor-control module.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repair
Bag or BinThe bag, bin, or dust cup is part of the airflow system.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repairFan or BlowerThe fan or blower wheel creates airflow.View repairSeal or GasketVacuums rely on sealed airflow.View repair
1–4 of 8

H-P Products MaxAir

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for H-P Products MaxAir
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now