ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Fuller Brush model guide

Fuller Brush Quick Maid FB-QM

Quick Maid FB-QM: compact stick or handheld vacuum. Service review covers power input, filter, motor, and nozzle.Quick Maid FB-QM: compact stick or handheld vacuum.

Status
Discontinued
Type
Cordless bagless broom vacuum
Characteristics
front lift-out dust cup · battery pack inside lower body · removable powered floor nozzle
Repair finder

Model issues and repair guidance

Do not judge battery capacity while the floor nozzle is loaded. Empty the cup, dry the filter, clear the inlet, and remove fibers from both roller ends; then time operation with the head free. A suction motor that runs while the brush stays still directs service to nozzle contacts, belt, roller, or head motor. A dead or short-running unit moves through charger, socket, pack connections, switch, controller, and motor, with no cord repair.Open the cup, filter, inlet, and roller before timing runtime. Suction with a still brush isolates nozzle contacts, belt, roller, or head motor. A dead or short-running unit follows charger, socket, pack contacts, switch, controller, and motor; there is no cord branch.

Possible causes

Possible repair paths for your Quick Maid FB-QM

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repair
Belt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repairBattery ReplacementA worn battery can make a cordless or robot vacuum run for only a few minutes, shut off under load, or fail to charge.View repairCharger or AdapterCharger repair starts by identifying the exact direct external adapter, wall-mounted charging cradle, cable, and machine charging port.View repairSeal or GasketVacuums rely on sealed airflow.View repair
Powerhead RepairPowerheads and floorheads do the heavy carpet work.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairControl Board RepairControl-board repair addresses a confirmed main PCB, motor controller, charging controller, display board, or sensor-control module.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repair
1–4 of 12

Fuller Brush Quick Maid FB-QM

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Fuller Brush Quick Maid FB-QM
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now