ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Fuller Brush model guide

Fuller Brush Power Team FB-PTCAN

Power Team FB-PTCAN: canister vacuum. Inspection covers airflow, hose, cord reel, and floorhead.Power Team FB-PTCAN: canister vacuum.

Status
Discontinued
Type
Corded bagged power-nozzle canister vacuum
Characteristics
top-opening sled canister · electrified hose and wand · wide powered headlight nozzle
Repair finder

Model issues and repair guidance

Divide weak suction from a dead floor brush at the canister inlet. Sound body pull sends inspection to hose airway and pins, wand contacts, nozzle neck, belt, roller ends, head switch, and head motor; weak pull sends it to paper bag, filters, hose seal, lid gasket, and fan path. Power that changes as the hose rotates points to contacts or internal wiring. Cord-reel service stays separate from the head circuit and suction motor.Sound body suction with a dead brush points to hose pins, wand contacts, nozzle neck, belt, roller ends, switch, or head motor. Weak body pull points to bag, filters, hose seal, lid gasket, and fan. Rotation-related cutout adds hose wiring; reel service stays separate.

Possible causes

Possible repair paths for your Power Team FB-PTCAN

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repair
Belt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairPowerhead RepairPowerheads and floorheads do the heavy carpet work.View repairCord ReelCord reels are convenient but can fail mechanically or electrically.View repair
Seal or GasketVacuums rely on sealed airflow.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repair
Fan or BlowerThe fan or blower wheel creates airflow.View repair
1–4 of 13

Fuller Brush Power Team FB-PTCAN

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Fuller Brush Power Team FB-PTCAN
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now