ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Fuller Brush model guide

Fuller Brush Power Maid FB-PM

Power Maid FB-PM is a compact stick or handheld vacuum. Repair assessment covers power input, filter, motor, and nozzle.Power Maid FB-PM is a compact stick or handheld vacuum.

Status
Discontinued
Type
Corded bagless power-brush handheld vacuum
Characteristics
wide motorized hand nozzle · bottom-empty dust cup · side hose with slide-out dusting brush
Repair finder

Model issues and repair guidance

Separate the motorized hand nozzle from the side-hose branch. Good suction through the hose with poor fabric pickup points to hair around the wide roller, bound end caps, belt slip, or the powered-nozzle drive; weak suction in both modes directs attention to the bottom-empty cup, filter, shared inlet, and seals. A slide-out brush that works only at one hose angle needs cuff and hose inspection. With moving parts free, no start follows cord, switch, wiring, fan, and motor.Compare side-hose suction with the motorized hand nozzle. Good hose pull isolates roller hair, end caps, belt, or head drive; weak pull in both modes points to cup, filter, inlet, and seals. Angle-sensitive hose loss adds cuffs; no start follows cord, switch, fan, and motor.

Possible causes

Possible repair paths for your Power Maid FB-PM

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repairBelt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repair
Brush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repairSeal or GasketVacuums rely on sealed airflow.View repairPowerhead RepairPowerheads and floorheads do the heavy carpet work.View repair
Cord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repairFan or BlowerThe fan or blower wheel creates airflow.View repair
1–4 of 12

Fuller Brush Power Maid FB-PM

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Fuller Brush Power Maid FB-PM
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now