ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Fuller Brush model guide

Fuller Brush Got It Maid FB-GIM

Got It Maid FB-GIM: compact stick or handheld vacuum. Service review covers power input, filter, motor, and nozzle.Got It Maid FB-GIM: compact stick or handheld vacuum.

Status
Discontinued
Type
Corded bagged shoulder canister vacuum
Characteristics
latching top bag cover · base cord wrap and blower port · shoulder strap with two-piece wands
Repair finder

Model issues and repair guidance

Verify that the flexible hose is connected to the suction inlet, not the blower port, before chasing low pickup. Test at the body, then through the hose, two-piece wand, and floor tool; a sudden drop locates the blockage or leaking cuff. Weak body pull keeps the paper bag, charcoal filter, cover gasket, and inlet seal in view. If air blows but suction is absent, recheck port routing. A silent motor follows the wrapped cord, strain relief, switch, protector, fan, and motor.Confirm the hose is on the suction inlet rather than the blower port, then test body, hose, wand, and tool in sequence. Weak body pull points to bag, charcoal filter, cover gasket, or inlet seal. No start follows cord, strain relief, switch, fan, and motor.

Possible causes

Possible repair paths for your Got It Maid FB-GIM

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repair
Seal or GasketVacuums rely on sealed airflow.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repair
Fan or BlowerThe fan or blower wheel creates airflow.View repair
1–4 of 9

Fuller Brush Got It Maid FB-GIM

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Fuller Brush Got It Maid FB-GIM
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now