ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

FilterQueen model guide

FilterQueen 112C

112C is a FilterQueen canister system from an earlier separator-canister generation. Repair assessment covers separator/filter path, hose, powerhead, cord, and motor.112C is a FilterQueen canister system from an earlier separator-canister generation.

Status
Discontinued
Type
Corded bagless separator canister vacuum
Characteristics
single rocker atop round motor head · three side latches on dirt tub · snap-lock powered wand
Repair finder

Model issues and repair guidance

Start overheating at the three-latch seal and filter stack, not at the single top rocker. Seat the cone against the tub rim, inspect the flat disc and motor screen, then clear the hose, snap-lock wand, and powered-nozzle throat. Full suction at the wand with poor carpet cleaning directs service to the cog belt, brush bearings, neck wiring, and breaker. If the entire machine remains silent after cooling, test the fixed cord, rocker contacts, internal leads, fan, and motor.For heat or weak pull, seat the cone, inspect flat disc and motor screen, and clear hose, wand, and nozzle throat. Good wand suction with poor carpet pickup moves to cog belt, brush ends, neck wiring, and breaker. No start follows cord and rocker.

Possible causes

Possible repair paths for your 112C

Filter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairClog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repairSeal or GasketVacuums rely on sealed airflow.View repair
Belt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repairPowerhead RepairPowerheads and floorheads do the heavy carpet work.View repair
Cord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairFan or BlowerThe fan or blower wheel creates airflow.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repair
1–4 of 12

FilterQueen 112C

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for FilterQueen 112C
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now