ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Dyson model guide

Dyson V15s Detect Submarine

Wet-and-dry V15s variant with separate Submarine, Fluffy Optic, and Digital Motorbar cleaner heads.Wet-and-dry V15s variant with separate Submarine, Fluffy Optic, and Digital Motorbar cleaner heads.

Status
Active
Type
Cordless bagless wet-and-dry stick vacuum
Characteristics
separate blue wet-roller head · green-light soft-roller head · rear circular display
Repair finder

Model issues and repair guidance

Dry pickup follows the rear filter, bin inlet, wand and whichever dry head is installed. Liquid stays in the software-matched wet head, so inspect its tank, roller and waste tray for a flow or leak complaint; do not substitute a dry-body, filter or ordinary cleaner-head repair when only wet collection has changed. Keep dry airflow and liquid handling as separate tests.Use filter, bin, wand and fitted dry head for suction loss. Use the matched wet head's tank, roller and waste tray for flow or leaks; keep liquid from the dry body. Keep dry and liquid paths separate.

Possible causes

Possible repair paths for your V15s Detect Submarine

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBin RepairCracked bins, worn latches, blocked inlets, and damaged bin seals that affect airflow or debris release on this Dyson.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repair
Cleaner Head RepairCleaner-head motors, wiring, drive assemblies, and housing faults that stop this Dyson's fitted powered head from cleaning correctly.View repairWet Roller RepairWet-roller repair addresses the absorbent roller, end caps, bearings, drive coupling, removable tray, and seating surfaces used to scrub and collect liquid.View repairPump or Liquid SystemPump and liquid-system repair addresses the clean-water delivery path: tank outlet, cap, valve, tubing, pump, spray channel, and model-specific wet-head connections.View repairBattery ReplacementA worn battery can make a cordless or robot vacuum run for only a few minutes, shut off under load, or fail to charge.View repair
Charger or AdapterCharger repair starts by identifying the exact direct external adapter, wall-mounted charging cradle, cable, and machine charging port.View repairPower Button or Trigger RepairPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairControl Board RepairControl-board repair addresses a confirmed main PCB, motor controller, charging controller, display board, or sensor-control module.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repair
Seal or GasketVacuums rely on sealed airflow.View repair
1–4 of 13

Dyson V15s Detect Submarine

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Dyson V15s Detect Submarine
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now