Dyson Spot+Scrub AI repair
Dyson Spot+Scrub AI Battery Replacement
internally serviced DR30 / RB05 battery pack is not treated as an owner-openable battery-cell repair. Safe checks end at charging behavior, temperature, physical condition, and manufacturer-authorized service. This procedure is scoped to the Spot+Scrub AI (DR30 / RB05) and its Spot+Scrub wet-and-dry robot platform.
Exact applicability
Machines covered by this guide
- Spot+Scrub AI machine code DR30
- Spot+Scrub AI machine code RB05
Repair scope
Before you order a part
- Repair path
- Professional repair
- Difficulty
- Professional service
- Time
- 10–20 minutes to document for service
A replacement component may be available for Spot+Scrub AI (DR30 / RB05). Confirm the failed assembly and exact fit before ordering; parts availability does not make this professional repair safe for DIY work.
Instructions
Safe checks before professional service
- Bright flashlight
- Clean dry lint-free cloth
- Switch the robot off, unplug the self-cleaning dock, and keep liquid away from electrical contacts before removing owner-maintenance parts.
- Use only owner-access points and maintenance actions documented for the exact machine code.
- Do not use or charge a swollen, leaking, cracked, wet, punctured, unusually hot, or impact-damaged battery.
- Do not open the robot or handheld body, rebuild a battery pack, replace individual cells, or bypass a battery-management circuit.
- Do not open the motor, battery pack, charger, switch, wiring, control board, pump, sensor module, or another sealed electrical assembly. Internal diagnosis belongs with a qualified repair technician.
Confirm the Spot+Scrub AI configuration
Spot+Scrub AI (DR30 / RB05) is a DR30 / RB05 vacuum-and-wash robot with camera and LiDAR navigation, a wet roller, liquid tanks, and a self-cleaning dock. Match the machine code and serial label before ordering a filter, debris container, brush, wet roller, tank, dock consumable, or external seal; a retail family name can cover incompatible hardware.
Confirm the symptom without opening the machine
Record runtime, charging indicators, app or screen messages, unexpected shutoff, and whether the symptom changes after the machine and charger reach normal room temperature.
Inspect only external charging hardware
Check the self-cleaning dock, power supply, and dry charging contacts and accessible contacts for damage, debris, liquid, heat, or discoloration. Do not remove an unlisted cover to reach the battery.
Arrange authorized battery diagnosis
Keep an unsafe battery away from heat and combustible materials and contact a qualified service provider for model-specific battery testing and replacement. Follow local battery transport and recycling rules.
Document the inspection
Photograph any visible damage and record the exact symptom, indicator, error message, and Spot+Scrub AI (DR30 / RB05) identity while the machine remains safely disconnected. This prevents an unconfirmed part choice during service handoff.
Sources and review
Guide references
Official references used for machine identity, safety, and owner-access boundaries.
Repair options
Book model-specific professional service
Related repairs
Other possible repairs for your Spot+Scrub AI
These are other repair paths applicable to this model.