ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Dyson model guide

Dyson Small Ball

Compact UP15 upright with an electrically connected cleaner-head assembly; its brush drive is not a conventional exposed stretch-belt system.Compact UP15 upright with an electrically connected cleaner-head assembly.

Status
Discontinued
Type
Corded bagless compact ball upright vacuum
Characteristics
short narrow cyclone tower · compact spherical steering body · compact powered cleaner head
Repair finder

Model issues and repair guidance

The compact lower duct and internal hose should be checked when wand suction remains but the floor path fades. Free the brush and inspect the cleaner-head electrical connection before body power; this head does not use the exposed stretch-belt service of earlier wheeled uprights, so belt replacement is excluded. Keep floor drive and whole-machine power as separate tests.Compare wand and floor suction, then inspect compact lower duct, internal hose, brush and head connector. Exclude the exposed stretch-belt path used on older designs. Separate floor drive from whole-machine power.

Possible causes

Possible repair paths for your Small Ball

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repair
Cleaner Head RepairCleaner-head motors, wiring, drive assemblies, and housing faults that stop this Dyson's fitted powered head from cleaning correctly.View repairBin RepairCracked bins, worn latches, blocked inlets, and damaged bin seals that affect airflow or debris release on this Dyson.View repairSeal or GasketVacuums rely on sealed airflow.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repair
Power Switch RepairA worn physical power switch, button, actuator, terminal, or immediate connection that interrupts mains-powered startup.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repair
1–4 of 10

Dyson Small Ball

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Dyson Small Ball
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now