ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Dyson model guide

Dyson Micro 1.5kg

Legacy-supported lightweight hard-floor stick with a Micro Fluffy roller; powered-tool service applies only to the fitted Micro Fluffy or optional mini motorized head.Legacy-supported lightweight hard-floor stick with a Micro Fluffy roller.

Status
Discontinued
Type
Cordless bagless compact hard-floor stick vacuum
Characteristics
small horizontal inline bin · narrow soft-roller floorhead · screw-retained battery base
Repair finder

Model issues and repair guidance

On hard floors, isolate the narrow soft-roller head from the lightweight body by testing the direct inlet first. Remove and wash only the documented roller, clear the small bin and rear filter, and treat a mini motorized tool as an optional second head. Battery removal is screw-serviced, not a click-in assumption. Confirm the affected section before replacing a sealed assembly.Compare direct inlet with the narrow soft-roller head; treat any mini powered tool separately. Clear small bin and filter, and identify the screw-serviced battery before parts. Confirm the affected section before parts.

Possible causes

Possible repair paths for your Micro 1.5kg

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBin RepairCracked bins, worn latches, blocked inlets, and damaged bin seals that affect airflow or debris release on this Dyson.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repair
Cleaner Head RepairCleaner-head motors, wiring, drive assemblies, and housing faults that stop this Dyson's fitted powered head from cleaning correctly.View repairBattery ReplacementA worn battery can make a cordless or robot vacuum run for only a few minutes, shut off under load, or fail to charge.View repairCharger or AdapterCharger repair starts by identifying the exact direct external adapter, wall-mounted charging cradle, cable, and machine charging port.View repairSeal or GasketVacuums rely on sealed airflow.View repair
Power Button or Trigger RepairPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairControl Board RepairControl-board repair addresses a confirmed main PCB, motor controller, charging controller, display board, or sensor-control module.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repair
1–4 of 11

Dyson Micro 1.5kg

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Dyson Micro 1.5kg
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now