ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Dyson model guide

Dyson DC35

Retired early Digital Slim stick for which Dyson no longer provides servicing or dependable replacement parts; inspection determines whether repair remains practical.Retired early Digital Slim stick for which Dyson no longer provides servicing or dependable replacement parts.

Status
Discontinued
Type
Cordless bagless stick vacuum
Characteristics
compact two-tier cyclone body · rear slide-in battery pack · narrow powered floorhead
Repair finder

Model issues and repair guidance

Check the washable pre-filter, bin inlet and narrow wand before diagnosing the older removable pack. If handheld suction is normal but carpet pickup stops, isolate the powered head's roller and connector; retired manufacturer support makes exact head and battery identification important before any substitute part is considered. Confirm the affected section before replacing a sealed assembly.Clear pre-filter, bin inlet and narrow wand first. Normal handheld suction keeps the fault at powered roller or connector; identify retired head and battery before parts. Confirm the affected section before parts.

Possible causes

Possible repair paths for your DC35

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBin RepairCracked bins, worn latches, blocked inlets, and damaged bin seals that affect airflow or debris release on this Dyson.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repair
Cleaner Head RepairCleaner-head motors, wiring, drive assemblies, and housing faults that stop this Dyson's fitted powered head from cleaning correctly.View repairBattery ReplacementA worn battery can make a cordless or robot vacuum run for only a few minutes, shut off under load, or fail to charge.View repairCharger or AdapterCharger repair starts by identifying the exact direct external adapter, wall-mounted charging cradle, cable, and machine charging port.View repairSeal or GasketVacuums rely on sealed airflow.View repair
Power Button or Trigger RepairPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairControl Board RepairControl-board repair addresses a confirmed main PCB, motor controller, charging controller, display board, or sensor-control module.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repair
1–4 of 11

Dyson DC35

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Dyson DC35
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now