ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Dyson model guide

Dyson DC27

DC27 upright with a separate brush-bar motor and geared internal head belt that requires DC27-specific professional service.DC27 upright with a separate brush-bar motor and geared internal head belt that requires DC27-specific professional.

Status
Discontinued
Type
Corded bagless wheeled upright vacuum
Characteristics
wide rectangular cleaner head · separate brush-bar motor housing · two large rear wheels
Repair finder

Model issues and repair guidance

The brush uses a separate head motor and internal geared belt, not the main-motor clutch path of nearby generations. With hose suction present, inspect lower airflow, brush bearings, head power and the geared belt together; if both modes fade, begin instead at bin, filters and seals before the suction motor. Keep the internal head drive separate from mains power.Treat the separate head motor and geared belt as one floor path. Hose suction present points to lower airway, brush or head; both-mode loss starts at bin and filters. Separate internal head drive from mains power.

Possible causes

Possible repair paths for your DC27

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repair
Cleaner Head RepairCleaner-head motors, wiring, drive assemblies, and housing faults that stop this Dyson's fitted powered head from cleaning correctly.View repairBelt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repairBin RepairCracked bins, worn latches, blocked inlets, and damaged bin seals that affect airflow or debris release on this Dyson.View repairSeal or GasketVacuums rely on sealed airflow.View repair
Cord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repairPower Switch RepairA worn physical power switch, button, actuator, terminal, or immediate connection that interrupts mains-powered startup.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repair
1–4 of 11

Dyson DC27

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Dyson DC27
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now