ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Dyson model guide

Dyson DC25

DC25 Ball upright with a separately powered cleaner head and an internal toothed belt; it is not serviced like a clutch-driven DC33 or DC14.DC25 Ball upright with a separately powered cleaner head and an internal toothed belt.

Status
Discontinued
Type
Corded bagless ball upright vacuum
Characteristics
single exposed ball housing · low electric brush-motor bulge · arched rear hose wand
Repair finder

Model issues and repair guidance

A brush that will not turn belongs to the ball head's motor, reset path, bearings and internal toothed belt, not to a clutched stretch-belt procedure. Compare wand suction to floor pickup and inspect the lower internal hose; use bin and two-filter service first only when airflow is weak in both modes. Keep the internal head drive separate from mains power.Check head motor, reset path, brush bearings and internal toothed belt—not a clutch belt. Compare wand and floor paths; both-mode loss starts at bin and filters. Separate internal head drive from mains power.

Possible causes

Possible repair paths for your DC25

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repair
Cleaner Head RepairCleaner-head motors, wiring, drive assemblies, and housing faults that stop this Dyson's fitted powered head from cleaning correctly.View repairBelt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repairBin RepairCracked bins, worn latches, blocked inlets, and damaged bin seals that affect airflow or debris release on this Dyson.View repairSeal or GasketVacuums rely on sealed airflow.View repair
Cord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repairPower Switch RepairA worn physical power switch, button, actuator, terminal, or immediate connection that interrupts mains-powered startup.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repair
1–4 of 11

Dyson DC25

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Dyson DC25
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now