ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Dyson model guide

Dyson Ball upright

UP13 Ball upright family sold under Animal, Allergy, Multi Floor, Complete, and Total Clean names with a motor-driven electrical cleaner-head assembly.UP13 Ball upright family sold under Animal, Allergy, Multi Floor, Complete, and Total Clean names.

Status
Discontinued
Type
Corded bagless ball upright vacuum
Characteristics
radial cyclone tower · exposed steering sphere · electrified floorhead
Repair finder

Model issues and repair guidance

Retail tool bundles share the same full-size body, but hose, lower duct and powered-head diagnosis must follow the fitted hardware. Test wand suction first; if it remains, inspect brush freedom and the head connector. If both paths are weak, return to bin seating and the washable filter set before motor work. Keep floor drive and whole-machine power as separate tests.Test wand suction before the fitted floorhead. Floor-only loss stays with lower duct, brush and head connector; both-mode loss starts at bin seating and filters. Separate floor drive from whole-machine power.

Possible causes

Possible repair paths for your Ball upright

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repair
Cleaner Head RepairCleaner-head motors, wiring, drive assemblies, and housing faults that stop this Dyson's fitted powered head from cleaning correctly.View repairBin RepairCracked bins, worn latches, blocked inlets, and damaged bin seals that affect airflow or debris release on this Dyson.View repairSeal or GasketVacuums rely on sealed airflow.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repair
Power Switch RepairA worn physical power switch, button, actuator, terminal, or immediate connection that interrupts mains-powered startup.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repair
1–4 of 10

Dyson Ball upright

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Dyson Ball upright
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now