ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

Douglas model guide

Douglas Ultra-Glide A6677 / D6678-79 / F6678-79 / H6678-79

Ultra-Glide A6677 / D6678-79 / F6678-79 / H6678-79: commercial upright vacuum. Repair assessment covers brush drive, airflow, cord, and switch.Ultra-Glide A6677 / D6678-79 / F6678-79 / H6678-79: commercial upright vacuum.

Status
Discontinued
Type
Low-profile powered floor-unit family
Characteristics
white rectangular hood · black wraparound bumper · raised blue top panel and rear neck
Repair finder

Model issues and repair guidance

Service this low unit as a powered floor head, not a collection vacuum. Confirm the connected canister supplies suction, then clear swivel neck and bottom opening, remove thread from roller ends, and inspect belt tracking, bristle height, base gasket, internal lead, switch, and brush motor. A missed strip across the hood can identify end-bearing drag or uneven brush wear. Match belt and wiring to the fitted suffix because grouped shells span several variants.Verify suction from the connected canister, then clear neck and base opening and inspect roller ends, belt tracking, bristles, gasket, internal lead, switch, and head motor. A missed strip points to bearing drag or brush wear. Match drive parts to the fitted suffix.

Possible causes

Possible repair paths for your Ultra-Glide A6677 / D6678-79 / F6678-79 / H6678-79

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairBelt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairPowerhead RepairPowerheads and floorheads do the heavy carpet work.View repair
Power Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repairSeal or GasketVacuums rely on sealed airflow.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repair
1–4 of 8

Douglas Ultra-Glide A6677 / D6678-79 / F6678-79 / H6678-79

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for Douglas Ultra-Glide A6677 / D6678-79 / F6678-79 / H6678-79
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now